Fountain Nozzle Sprinkler

Approx. 50 / Piece Get Latest Price

Product Brochure
BRASS SPRAY NOZZLE,MIST NOZZLE,RAIN DANCE NOZZLE AVAILABLE IN MALE & FEMALE THREAD 





.

Approx. 190 / Piece Get Latest Price

Product Brochure
Super2 Fogging Nozzle,    Providing small, atomized spray droplets, these nozzles are recommended for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. All are easy to clean and have a strainer.

Brass nozzles have good corrosion resistance.

  

Approx. 450 / Piece Get Latest Price

Product Brochure

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant. They're good for cooling, humidification, and dust- and foam-control applications. All provide a uniform distribution of droplets.

Brass nozzles have good corrosion resistance.

Spray nozzle fittings  also available.

Approx. 150 / Piece Get Latest Price

Product Brochure

Providing small, atomized spray droplets, these nozzles are recommended for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. All are easy to clean and have a strainer.

Brass nozzles have good corrosion resistance.

Approx. 150 / Piece Get Latest Price

Product Brochure

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, rinsing, and dust- and foam-control applications. They provide a uniform distribution of droplets.

Brass nozzles have good corrosion resistance.

Spray nozzle fittings  also available.

Approx. 550 / Piece Get Latest Price

Product Brochure
super1 ROTERY  SPRINKLER rotating sprinkler on triangle baseDescription

Approx. 1,200 / Piece Get Latest Price

Product Brochure

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain. They're easy to mount and inspect. A fast flow rate and long spray distance makes them good for washing tanks and large vessels.

Brass nozzles have good corrosion resistance.

Approx. 150 / Piece Get Latest Price

Product Brochure
Most commonly used in smaller fountain spray rings, this level independent nozzle has its jet above the surface of the water. If the water level drops, the water stream is unaffected. The water stream is typically less turbulent with this type of brass nozzles requiring less pump power. The pattern with this type of nozzle is defined by the jet orientation and not surface wave action within the pool. These nozzles are better for large interactive fountains as well as fountain applications requiring a precise stream of water such as spitting fountains. Level independent nozzles include jet, cluster, 3-tier, finger, dome and most specialty nozzles.

Approx. 2,500 / Piece Get Latest Price

Product Brochure

• Foamy Column Jet nozzle is, in itself, a spray ring on which between 24 and 90 6 mm jet nozzles are fitted to produce a larger diameter rising column of water but without the high flow that a continuous jet of the same diameter outlet would require. The jet nozzle outlet has to remain above the level of water in the fountain pond. The name itself indicates the foamy appearance it produces, which is achieved by adding several small jets. It is highly suitable for large outdoor water feature fountains

Approx. 650 / Piece Get Latest Price

Product Brochure
Bell creates a clear water bell pattern in the adjustable shape. It is the least noise and splash fountain effect. The relaxing sound of splashing water is particularly effective in silence wind-free locations like the water garden, indoor reception hall, or outdoor pool that are protected from the wind. Besides, water bell fountains are water level independent and can be located in dry areas.

Approx. 650 / Piece Get Latest Price

Product Brochure
Blossom is a small to medium size nozzle provides attractive multi-stage water pattern. It creates a sparkling and unique triple-tiered effect of clear streams that are stable in wind. Blossom is ideal for small and medium size displays and it is water level independent.

Approx. 950 / Piece Get Latest Price

Product Brochure
Bubbling is a small to medium injector nozzle generates a lively full water pattern and offers oxygen enrichment. With injector effect, water and air are suctioned in, mixed intensively and accelerated into the air by the injector jet as an impressive soft flowing fountain. The foam (spume) effect changes depending on the water level and accentuates every public area.

Approx. 1,500 / Piece Get Latest Price

Product Brochure
Crown is a medium size multi-jet nozzle. It gives out 20 clear and precise single jets. This brass nozzle is suitable for fresh water and pool water application. Crown nozzle is water level independent and can be located in dry areas.

Approx. 2,500 / Piece Get Latest Price

Product Brochure
3 tier adjustable fountain nozzle is a medium to large size nozzle that provides attractive multi-stage water pattern. It creates a sparkling and unique triple- tiered effect of clear streams that are stable in wind. It is also ideal for medium and large size displays with water level independent

Approx. 350 / Piece Get Latest Price

Product Brochure
super 2 adjustable pool nozzle                           
  
  
  
  
  
  
  
 

Approx. 75 / Piece Get Latest Price

Product Brochure

These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

Brass nozzles have good corrosion resistance.

Spray nozzle fittings available.

Approx. 850 / Piece Get Latest Price

Product Brochure
Lotus is a medium to Large size nozzle provides attractive two-stage water pattern. It creates a sparkling and unique double-tiered effect of clear streams that are stable in wind. Lotus is ideal for medium and large size displays and it is water level independent.

Approx. 250 / Piece Get Latest Price

Product Brochure

The spray is deflected at a steep angle to produce a low-impact, extra-wide spray. These nozzles are good for rinsing and cooling jobs as well as for foam control and applying coatings. All produce a flat, thin spray pattern.

Brass nozzles have good corrosion resistance.

Spray nozzle fittings also available.

Approx. 2,500 / Piece Get Latest Price

Product Brochure
cascade jet nozzle is one of the most widely used in architectural fountains. If it is installed with the level of water stipulated by the manufacturer, it generates a very attractive cone of sparkling waterThe water coming out of the cascade jet nozzle draws a column of water from the fountain pond, which produces a great deal of turbulence. It is manufactured in two different series: 100% brass and another lighter and cheaper range of stainless steel mixed with brass. With the latter model, three different water levels in the pond can be used to produce different water features: a very high cone with a small base or a cone with less height and a wider base.

Approx. 1,200 / Piece Get Latest Price

Product Brochure
It covers areas from a 25 ft. up to a 45 ft. radius in a part- to full-circle spray pattern. Adjustments only require a flat-head screwdriver, not a special adjustment key. The gear drive rotor ensures even and complete water coverage as well as a quiet spray. A filter protects the nozzle from clogging and is easily accessible for cleaning. It is compatible with all major brands of gear drive rotors including Rain Bird, Hunter, and Toro.

Approx. 1,800 / Piece Get Latest Price

Product Brochure
Finger jet produces a delicate, arching spray pattern using precision clear stream jets. Combined with a main swivel connection permits a wide range of spray patterns and angles. Due to the low noise and splash reduced, finger jets are ideal use in courtyard or entryway pools designed for close range viewing distance. Finger jet nozzles are water level independent and can be located in dry areas.

Approx. 250 / Piece Get Latest Price

Product Brochure
This series of fountain nozzles are the most widely used in the world of water feature fountains.  The output diameter varies with the threaded connector (male or external thread). They are manufactured from calibrated brass piping. They are also fitted with one or two inner jet cut-offs (depending on model) that ensure the optimal quality of the water jet up to the heights shown on the technical data sheet.. They also have a smooth ball joint that can reach a maximum slope of 20°, thereby enabling parabolic jets to be designed with no additional parts. Small and medium sizes (4 to 10 mm outlet) are suitable for indoor architectural fountains, while 10 to 19 mm diameter outlets are most suitable for outdoor use..