Ball Bearings

Approx. 450 / Piece Get Latest Price

Thrust bearings are designed to manage thrust loads and provide high-shock-load resistance in a wide variety of applications.

Approx. 250 / Piece Get Latest Price

self aligning ball bearing 1304 offers excellent alignment error compensation. With the two rings of barrel-shaped rollers, it can absorb high radial forces. Main dimensions according to DIN 630,

• self-aligning ball bearing with two rows of balls
• pivoting inner ring, misalignments and shaft deflections can be compensated
• suitable for high radial loads and light axial loads in both directions
• cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures
• seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
• good fixed bearing property, but can also be used as a floating bearing, each in both directions
• manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics

Approx. 150 / Piece Get Latest Price

The needle bearing NK5/10-TN has thin cylinders as rolling elements and can absorb high radial forces. Since it has no inner ring, it can be placed directly on the shaft and is suitable for a particularly space-saving installation.  

• it consists of a machined massive outer ring with rib and a needle roller and cage assembly
• suitable for high radial load capacities
• without inner ring, lighter than the NKI series and suitable for higher speeds
• cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
• can be used if the surface of the shaft is suitable as a raceway
• In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.

Approx. 450 / Piece Get Latest Price

The tapered roller bearing 30318 has tapered rollers as rolling elements and is suitable for high combined loads from the radial and axial directions. Main dimensions according to DIN 720,

• has conical rollers as rolling elements
• suitable for high combined loads in one direction
• it has also an axial load carrying capacity on both sides in the X- or O-arrangement in pairs
• is relatively narrow compared to their inner and outer diameter
• very good fixed bearing properties in one direction
• manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics

Approx. 350 / Piece Get Latest Price

Due to the cylindrical rollers, the cylindrical roller bearing NJ2208-E-M has large contact surfaces between rolling elements and bearing rings. It is suitable for high radial loads and high speeds. Main dimensions according to DIN 5412-1,

• suitable for high radial load capacities and high speeds
• wider than series 2 and suitable for slightly higher loads
• Variant NJ: semi- locating bearing, axially displaceable in one direction
• cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
• manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics